INDUSTRIAL LIGHTING FIXTURE FOR ORDINARY AND HAZARDOUS LOCATIONS.

• • Class I Div. 2/Groups C,D Class II Div. 1 Groups E,F,G.
    Class I Zone 2/Groups II B, II A, Zone 20, 21, 22

APPLICATIONS:

• Series LH, are designed for use where moisture, dust, dirt, corrosion
  and vibration may be present or where exist the possibility of water,wind or snow.
  They can be use in ordinary location and in hazardous locations by the presence of flamable vapors, gases or combustible dust as defined by NEC. (National Electrical Code).
  Lighting fixtures could be use in manufacturing plants, and certain
  chemical and petrochemical processing facilities, sewage treatment
  plants, offshore installations, warehouse, etc.
  Designed lamp mounted base up position.
  Easy access to the electrical components by hinged housing.
  For use indoor and outdoor.

MATERIALS:

• • Body and mounting: Die cast aluminum.
    Finish: Electrostatic powder coating epoxic/polyester. Minimum
    thickness 2 mils.
    Saline chamber test to paint according to ASTM B117
    Paint adhesion test according ASTM 3359
    Resistance to mechanical impacts according to IK09 body, thanks to its
    design that does not have elements susceptible to breakage.
    External hardware: Stainless steel.
    Refractor globe: Threaded heat resistant prismatic crystal.
    NPT threaded to ensure ground continuity.

CHARACTERISTICS:

• Mounting types: Pendant, stanchion 25° and straight 90°, ceiling, wall with or without housing.
  Lampholder: Mogul and medium base for high temperatures.
  Gaskets: Silicone for high temperatures.
  Guard: Die cast aluminum.
  Lamp not furnished. Accept maximum lamp lenght of 210mm (8.26”)
  Reflector: fiberglass reinforced with white polyester.
  Grounded Housing.
  Factory sealed: Refer to installations instructions for external seal requeriments.

COMPLY WITH::

• UL 844 UL 1598
  CSA C22.2 No.137
  NEMA 3,4 X
  IESNA – LM – 31
  IESNA – LM – 46
  NMX-J-307-ANCE-2017
  NMX-J-627-ANCE-2009
  NMX-J-529-ANCE-2012