EXPLOSIONPROOF INDUSTRIAL LIGHTING FIXTURE.

ENCLOSED AND GASKETED

LE-LED SERIES

- Class I Div. 1/Groups C, D class II Div. 1 Groups E, F, G.
  Class I Zone 1/Groups II B, II A. Zone 20, 21, 22

- The LED lighting fixtures are available in warm, neutral white, and cool white.
  light has uniform illumination and are designed for interior or exterior use.
  using an LED arrangement can overcome 1000 watts of HID light.

APPLICATIONS:

- Series LE-LED, lighting fixtures designed for use where moisture, dust, dirt, corrosion and vibration may be present or where exist the possibility of water, wind or snow.
- They can be use in ordinary location and in hazardous location by the presence of flammable vapors, gases or combustible dust as defined by NEC. (National Electrical Code).
- Lighting fixtures could be use in manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, offshore installations, warehouse, etc.

MATERIAL:

- Body and mounting: Diecast aluminum.
- Finish: Electrostatic powder coating epoxic/polyester. Minimum thickness 2 mils.
- Saline chamber test to paint according to ASTM B117
- Paint adhesion test according to ASTM 3359
- Resistance to mechical impacts according to IK09 body, thanks to its design that does not have elements susceptible to breakage.
- External hardware: Stainless steel.
- Refractor globe: Tempered cristal impact and high heat resistant.
- Gaskets: Silicone for high temperatures.

CHARACTERISTICS:

- Photometric Distribution: HB-60º, HB-90º, IESNA Type II, Type III and Type V.
- Minimal maintenance.
- Instant ignition.
- Operation at low temperatures.
- Low surface temperatures.
- LED system can save up to 80% in energy costs.
- 50,000 hours of life can provide more than 10 years of lighting without maintenance.
- Grounded housing
- Contains no mercury and hazardous chemical products.
- Operation temperatures: -30 ºC up to 50 ºC
- 4 Mounting types: Pendant, stanchion ceiling, wall.
- Wet locations
- Raintight
- Explosionproof
- Dust-ignition proof
- Initial lumens +_ 5% @ 25 ºC
- Protection against current variations through voltage supressor category C3 10 KV line-ground
- External flaps provides great therminal transfer for a long life of LED, obtaining higher T-Ratings.
- Real performance could vary as a result of application and environment where the lighting fixtures are installed.
- All parameters are designed and measured under laboratory conditions at 25 ºC.
- T4A temperature range for safe use in most hazardous environments.
- Factory sealed: Refer to installation instructions for external seal requirements.
- NPT threaded to ensure ground continuity

Manufactured in base to:

- UL 844 UL 1598
  CSA C22.2 No.137
  UL 8750 LED
  NEMA 3, 3R, 4, 4X
  NMX-J-307-2017
  NMX-J-627-2009
  NMX-J-529-2012
  NOM-064-SCFI-2014
  NOM-030-ENER-2016
  NOM-003-SCFI-2014
  NOM-001-SCFI-2018
  NOM-058-SCFI-2017
  NOM-064-SCFI-2017
  NOM-024-SCFI-2013