LH INDUSTRIAL LIGHTING FIXTURE FOR ORDINARY AND HAZARDOUS LOCATIONS.

SERIE LH-PC

Class I Div. 2/Groups B,C,D class II Div. 1 Groups E,F,G.
Class I Zone 2/Groups II B, II B Plus Hydrogen, II A. Zone 20, 21, 22

Applications

LH series are designed for use where moisture, dust, dirt, corrosion and
vibration may be present or where exist the possibility of water, wind or
snow.
They can be used in ordinary locations and in hazardous locations by
the presence of flammable vapors, gases or combustible dust as defined
by NEC. (National Electrical Code).
Lighting fixtures could be used in manufacturing plants, and certain
chemical and petrochemical processing facilities, sewage treatment
plants, offshore installations, warehouse, etc.
Designed lamp mounted base up position.
Easy access to the electrical components by hinged housing
For use indoors and outdoors.

Materials:

Body and mounting: Die cast aluminum.
PVC Coating: 40 mils minimum
Purple Urethane: 2 mils minimum
Saline chamber test according to ASTM B117
Paint adhesion test according ASTM 3359
Resistance to mechanical impacts to body according IK09 casing,
thanks to its design that does not have elements susceptible to breakage.
Pressure sealing sleeves on conduit openings
External hardware: Stainless steel.
Refractor globe: Threaded heat resistant prismatic crystal
NPT Threaded to ensure ground continuity.

Characteristics:

6 Mounting types: Pendant, stanchion 25° and straight 90°, ceiling and
wall with or without housing
Lampholder: Mogul and medium for high temperatures.
Gaskets: Silicone for high temperatures
Guard: Diecast aluminum
Lamp not furnished. Accepts maximum lamp length of 210 mm (8.26”)
Reflector: fiberglass reinforced with white polyester
Grounded housing.
Factory sealed: Refer to installations instructions for external seal requirements.

Comply with:

• UL 1598
  UL 844
  CSA C22.2 No.137
  NEMA 3,4 X
  IESNA – LM – 31
  IESNA – LM – 46
  NEMA BI 50006-2024
  NMX-J-307-ANCE-2017
  NMX-J-627-ANCE-2009
  NMX-J-529-ANCE-2012