EXPLOSION PROOF INDUSTRIAL LED FLOODLIGHT

• • Class I Div. 2/Groups B,C,D class II Div. 1 Groups E, F, G.
  • Class I Zona 2/Groups II B, II B Plus Hidrogen, II A. Zone 20, 21, 22

• • The LED floodlights are available in cool white and have uniform illumination.
    and are designed for interior or exterior use, using an LED arrangement
    can overcome 1500 watts of HID light.

Applications:

• • Series RFE-LED, lighting fixtures designed for use where moisture, dust, dirt, corrosion and vibration may be present or where There exists the possibility of water, wind or snow.
    They can be used in ordinary locations and in hazardous locations by
    the presence of flammable vapors, gases or combustible dust as
    defined by NEC. (National Electrical Code)
    Lighting fixtures could be used in manufacturing plants, and certain
    chemical and petrochemical processing facilities, sewage treatment
    plants, offshore installations, warehouse, tunnels, recreative areas,
    gymnasiums, any industry, parking lots, building facades, perimeters
    areas, etc.

Material:

• • Body and mounting: Die-cast aluminum.
    Finish: Electrostatic powder coating epoxy/polyester
    Minimum thickness 2 mils
    Saline chamber test to paint according to ASTM B117
    Paint adhesion test according to ASTM 3359
    External hardware: Stainless steel.
    Lens: Tempered crystal impact and high heat resistant.
    Gaskets: Silicone for high temperatures.
    T5 temperature range for safe use in most hazardous environments.
    Resistance to mechanical impacts according to IK09 body, thanks to its design
    that does not have elements susceptible to breakage.

Characteristics:

• Photometric distribution: HB-120º for RFE 1-7. HB-40º and HB-60º for REF-8-10
• Minimal maintenance.
• lnstant ignition.
• Operation at low temperatures.
• Low surface temperatures.
• The LED system can save up to 80% in energy costs.
  50,000 hours of life can provide more than 10 years of lighting.
  without maintenance.
  Contains no mercury and hazardous chemical products.
  Operating temperatures: -30ºC up to 50ºC
  Mounting type: Positionable bracket
  Wet locations
  Raintight
  Explosion-proof
  Dust-ignition proof
  Initial lumens ± 5% @ 25ºC.
  Grounded housing.
  Robust and light luminaire design with passive thermal dissipation
  system thanks to its stylish dissipating blades to keep internal
  electronic elements at a suitable operating temperature.
  NPT threaded to ensure ground continuity

Compliances:

• UL 844 UL 1598
  CSA C22.2 No.137
  UL 8750 LED
  NEMA 3, 3R, 4, 4X IP66
  NMX-J-307-ANCE-2017
  NMX-J-627-ANCE-2009
  NMX-J-529-ANCE-2012