LED WEATHERPROOF FLOODLIGHT

• • The LED Weatherproof Floodlight fixtures are available in two types of color.
    temperatures Neutral and cool White, both have uniform illumination,
    Designed for interior or exterior use, using an LED arrangement can
    overcome 250 W incandescent light.

APPLICATIONS:

• • Low ceiling mounting, tunnels, reduced spaces or rooms.
  • Areas where the maintenance is hard to reach.
  • General areas.
  • Security areas.
  • Perimeter Buildings.
  • Patios.
  • Landscape.
  • Facades.
  • Loading decks.
  • Cooling chambers, sewage plants, corrosive, dirt and humidity environments.
  • Bridges.

ADVANTAGES:

• Photometric distribution: Type II, Type III and HB-90º.
• Finish: electrostatic powder coating epoxy/polyester minimum thickness 2 mils.
• Saline chamber test to paint according to ASTM B117.
• Paint adhesion test according to ASTM 3359.
• Resistance to mechanical impacts according to IK09 body, thanks to its design that does not have elements susceptible to breakage.
• Compact and robust.
• Minimal maintenance.
• Instant ignition.
• Resistant to impacts and vibrations.
• Operation at low temperatures.
• Low surface temperatures.
• Controller with internal fuses for branch circuit protection.
• The LED system can save up to 80% in energy costs.
• 50,000 hours of expected life can provide more than 10 years of lighting without maintenance.
• Contains no mercury and hazardous chemical products.
• Operating temperatures: -30° up to 50°C
• 3 mountings: ¾” conduit, swivel bracket and positionable arm.
• External Flaps provides great thermal transfer for a long life of LED obtaining higher T-Ratings (if apply).
• Factory Pre-Wired Assembly.
• Initial lumens ± 5% @ 25 ºC.
• Grounded housing.
• Protection against current variations by overvoltage suppressor category C3 10 KV line – ground.

MATERIALS:

• • Aluminum Diecast Housing.
  • Stainless Steel Hardware.
  • Polycarbonate prismatic lens resistant to UV light.
  • Swivel Bracket and sun shade: Stainless Steel
  • Gaskets: Silicone.
  • Real performance could vary as a result of the application and environment where the Lighting fixtures are installed.
    All parameters are designed and measured under laboratory conditions at 25ºC.
    T5 temperature range for safe use in most hazardous environments.
    Factory sealed: Refer to installation instructions for external seal requirements.
    NPT threaded to ensure ground continuity

Compliances:

• • UL 1598
    CSA C22.2 No. 250
    UL 8750
    NEMA 4, 4X
    RoHs
    NMX-J-307-2017
    NMX-J-627-2009
    NMX-J-529-2012