V 100 RT LED SERIES RETROFIT. WEATHERPROOF. LIGHTING FIXTURE

ENCLOSED AND GASKETED

    • The V 100 LED Retrofit lighting fixtures are available in cool white temperature, having uniform illumination, and are designed for interior or exterior use. Using a 12 W Max., 1000 lumens LED arrangements can overcome 75 watts incandescent light, or 18 W CFL light.
    • The complete series of weatherproof lighting fixtures RAWELT LED Retrofit, is for industrial use to protect from non-explosive vapors, noncombustible dusts, corrosive fumes, water and humidity.
    • Modern and heavy duty design, it can be used in the interior or exterior of industrial plants, tunnels, bridges, security areas, freezers, water and waste processing plants, food processing areas, etc.
    • Suitable for indoor and outdoor, wet and damp locations for downlight only with clear glass globe thermal shock resistant.

MATERIAL:

      • Polycarbonate globe and heat resistant glass globe.
      • Diecast aluminum.
      • Saline chamber test to paint according to ASTM B117
      • Paint adhesion test according ASTM 3359
      • Resistance to mechanical impacts according IK09 body, thanks to its design that does not have elements susceptible to breakage.
      • Stainless steel screws.
      • Gasket: Silicone.

FINISH:

  • Electrostatic powder epoxy/polyester coating.
  • Shipped with clear glass globe thermal shock resistant or polycarbonate globe.
  • To order a colored glass globe, add the following suffix to the code number:
    R = red, V = green, AZ = blue, AM = amber.
  • Minimal maintenance.
  • Instant ignition.
  • Operation at low temperatures.
  • Low surface temperatures.
  • 12 W Max, 1000 initial lumens 5% @ 25 °C system can save up to 90% in energy costs.
  • 50,000 hours of life can provide more than 10 years of lighting without maintenance.
  • Contains no mercury.
  • Operation temperatures: -30 °C up to 50 °C.
  • Glass globe working temperature -22 °C up to +230 °C without thermal shock.
  • Recommended silicon gasket for NEMA 4,4X, IP65 and silicon sealing in compound plugs
  • Not for use in dwellings. When supply wire exceed 90 °C.
  • Weatherproof fixtures are not for use in hazardous locations.
  • Grounded housing
  • Real performance could vary as a result of application and environment
    where the lighting fixture are installed.
    All parameters are designed and measured under laboratory conditions at 25 ºC.
    T5 temperature range for safe use in most hazardous environments.
    Factory sealed: Refer to installations instructions for external seal requirements.
  • Photometric Distribution: HB-120º.
  • NPT threaded ensure ground continuity

POLYCARBONATE GLOBE:

  • Clear and transparent, like glass.
    High heat resistance.
    Flammability classification up to UL 94 V -0/1.2 mm or
    UL 94-5VA/3.0 mm 2600F1, 94HB, F1
    High physical toughness against impacts and scratching.
    Dimensional accuracy and stability.
    Dielectric strength 32-35 kv/mm (1 mm wall thickness).
    Keeps its physical and chemical properties in a range
    of -40 ˚C up to 120 ˚C.

Comply:

  • UL 1598
  • CSA C22.2 No. 250
  • UL 8750 LED
  • NMX-J-307-ANCE-2017
  • NMX-J-627-ANCE-2009
  • NMX-J-529-ANCE-2012
Scroll to Top