WEATHERPROOF LIGHTING FIXTURE. WITH GLASS GLOBE
ENCLOSED AND GASKETED.
V100 SERIES
- The complete series of weatherproof lighting fixtures RAWELT is for industrial use to protect from non-explosive vapors, non-combustible dusts, corrosive fumes, water and humidity. To protect socket, lamp and wiring.
- Modern and heavy duty design, it can be used in the interior or exterior of industrial plants, tunnels, bridges, security areas, freezers, water and waste processing plants, food processing areas, etc.
- Suitable for wet and damp locations for downlight only with clear glass globe thermal shock resistant.
- For use indoor and outdoor.
MATERIAL:
- – Diecast aluminum.
- – Thermal shock resistant glass globe, and polycarbonate globe. Stainless steel screws.
- – Gasket: Silicone.
- – Socket: Porcelain and 200 °C wire.
- – Heat resistant glass globe.
- – Saline chamber test to paint according to ASTM B117
- – Paint adhesion test according ASTM 3359
- – Resistance to mechanical impacts according IK09 body, thanks to its design that does not have elements suceptible to breakage.
- – Stainless steel screws.
- FINISH: Electrostatic powder epoxy/polyester coating.
- Shipped with clear glass globe thermal shock resistant.
- To order a colored glass globe, add the following suffix to the code number:
R=red, V=green, AZ=blue, AM=amber. - Shipped without light bulb.
- Supply conductor rated 125 °C minimum in ceiling and pendant mount and 60 °C in wall mount.
- Accepts up to 100 watt glass globe.
- USE: LED lamp Selfballasted 20 W
- Working temperature -22 °C up to +230 °C without thermal shock.
- Recommended silicon gasket for NEMA 4,4X, IP65 silicone sealing compound plugs.
- Not for use in dwelings. When supply wire exceed 90 °C.
- Weatherproof fixtures are not for use in hazardous locations.
- Maximum length lamp with short coupling: 160 mm
- Maximum length lamp with long coupling: 184 mm
- Grounded Housing
- In compliance with:
- UL 1598
- CSA C22.2 No. 250
- NMX-J-307-ANCE-2017
- NMX-J-627-ANCE-2009
- NMX-J-529-ANCE-2012
