WALL PACK LED LIGHT FIXTURE WEATHERPROOF

ENCLOSED AND GASKETED

WP-LED SERIES

  • The WP LED Wallpack lighting fixtures are available in coolwhite,
    have uniform illumination, and are designed for interior or exterior
    use, using a LED arrangements can overcome 250 watts of HID light.

APPLICATIONS:

  • Facades, courtyards, corridors, tunnels, stairs, perimeter of
    buildings, parking lots, loading dock, and many more
    industrial and commercial applications.

MATERIAL:

    • Saline chamber tests to paint according to ASTM B117
    • Paint adhesion test according to ASTM 3359
      Diecast aluminum.
      Finish: electrostatic powder coating epoxy/polyester
      minimum thickness 2 mils.
      Heat-resistant polycarbonate lens.
      Stainless steel screws.
      Gasket: Silicone.
      T3C temperature range for safe use in most
      hazardous environments.
      Resistance to mechanical impacts according to IK09 body, thanks to its
      design that does not have elements susceptible to breakage.
      Not for use in dwellings when supply wire exceeds 90 ˚C.
      Suitable for wet and damp locations when downlight only.
      Recommended silicone gasket for NEMA 4,4X and silicone
      compound in plugs.
      Photometric distribution: IESNA Type II

CHARACTERISTICS:

  • Minimal maintenance.
  • Instant ignition.
    Operation at low temperatures.
    Low surface temperatures.
    The LED system can save up to 80% in energy costs.
    50,000 hours of life can provide more than 10 years of
    lighting without maintenance.
    Contains no mercury or hazardous chemical products.
    Operating temperatures: -30°C up to 50°C.
    Initial lumens 5% @ 25ºC.
    Grounded housing.
    Robust and light luminaire design with passive thermal
    dissipation system thanks to its stylish dissipating blades
    to keep internal electronic elements at a suitable operating
    temperature.
    Protection against current variations by overvoltage
    suppressor category C3 10 KV line – ground.
    Polycarbonate lens:
    Clear and transparent lens, like glass.
    High heat resistance.
    Flammability classification up to UL 94 V -0/1.2 mm or
    UL 94-5VA/3.0 mm 2600F1, 94HB, F1
    High physical toughness against impacts and scratching.
    Dimensional accuracy and stability.
    Dielectric strength: 32-35 kv/mm (1 mm wall thickness).
    Keeps its physical and chemical properties in a range of-40˚C
    up to 120˚C.
    Energy savings.
    Real performance could vary as a result of application and
    environment where the lighting fixtures are installed.
    All parameters are designed and measured under laboratory conditions at 25ºC
    T5 temperature range for safe use in most hazardous environments.
    Factory sealed: Refer to installation instructions for external
    seal requirements.

Compliances:

  • UL 1598
    CSA C22.2 No.250
    UL 8750 LED
    NMX-J-307-ANCE-2017
    NMX-J-627-ANCE-2009
    NMX-J-529-ANCE-2012
Scroll to Top